What should be paid attention to when using the lift
Lift in many industries will be used, whether it is any mechanical equipment, in the use of time to ensure the stability of the machine, if the lift is not stable, it is prone to failure or safety problems, so the lift in the process of use what details can not be ignored?
1, to understand the operation of the mechanism, mainly to see whether it is normal, there is no noise in the process of use, when found fault, need to be eliminated in time, so as to ensure the normal operation and use of the machine. Usually in the installation of the need to disassemble or adjust the rotary mechanism, in this case, to ensure that the rotary mechanism in the center line of the reducer and gear center line can be parallel, of course, the meshing gap should be appropriate. If this is not appropriate, then the machine will not work properly.
2, in the use of lift, the use of the process to check the connection of each part, when there is loose, to tighten in time. All the connecting shafts need to use cotter pins, in order to be able to fully open, and then can be better used.